PDA

View Full Version : Varible psi input



butthead
05-11-2011, 09:54 PM
I have a small compressor that I use on my workbench and I am wondering if I can use that to feed the shoebox. The problem is the compressor varies between 75 - 100 psi. I can adjust the output to 85 psi but the compressor waits till it reaches 75 psi to kick back on. What effect would this have on the shoebox? Input will be mostly 85 psi but going down to 75 psi some of the time.

Gabby
05-11-2011, 10:10 PM
B H, I bet you dont have any problem because the SB takes so little air to run it. I had mine hooked to a small Campbell-Hausfield 2 gallon and it worked fine but came on more than the Craftsman 4 gallon that I have now.

TomKaye
05-11-2011, 11:50 PM
It should be ok. Tom

butthead
05-12-2011, 12:45 AM
Thank you.